Key supplier of
stone care products
in Oman
The Quality of Product - Made in Spain
Professional chemical products
for surface treatment
Efflorescence
Blocking Sealant
WHERE TO APPLY
- Back face and Edges of the Pieces before their Installation Marble, Granite, Natural Stone and Terrazo.
HOW TO USE
- Do not mix /dilute with other Products.
- The Surface Must be Clean & Dry.
- Spread the Product evenly on the back and edges to the material with a brush or roller and let it dry for 8 hours before installation
ADVANTAGES
- Permanent Protection
- It Blocks the rising up by capillarity action of salts, moisture, iron substances & other pollutants, preventing the transfer from the back to the surface of the Stone
- Waterproofing the entire surface without affecting the adhesion Capacity of the Cement-glue.
Waterproof Sealer
for Marble & Granites
WHERE TO APPLY
- All Kind of Stone Surface
- Polished and Unpolished Marbles & Granite, Natural Stone,Sandstones & Artificial stone
HOW TO USE
- Do not mix/dilute with other Products.
- The Surface Must be Clean & Dry.
- Apply On the Surface by using a brush or roller and let it dryÂ
- Polished surfaces one Coat & Un polished surfaces 2 Coat Required After a 6 hours it will become Completely Sealed and Protected.Â
ADVANTAGES
- It is suitable for the treatment of outdoor SurfacesÂ
- Very Good Parotection Against Water & Dirt
- High Sealing Capacity
- It Does not Change natural look of the Surface
Waterproof Sealer
for Marble & Granites
WHERE TO APPLY
- All Kind of Stone Surface
- Polished and Unpolished marbles & Granite, Natural Stone, Sandstones & Artificial stone
HOW TO USE
- Do not mix /dilute with other Products.
- The Surface Must be Clean & Dry.
- Apply On the Surface by using a brush or roller and let it dry.
- Polished surfaces one Coat & Unpolished surfaces 2 Coat Required.
- After a 12 hours it will become Completely Sealed and Protected.
ADVANTAGES
- It Does not Change natural look of the surface
- Completely seals the pores of all kind of stone surface.
- Avoids the Penetration into the Stone Of Oils, Vineger, Greases,Paint & all kind of external Agents
- Specially recommended for the protection of kitchen & bathroom tops, and facades
ACID Stripper
(After Construction Work)
WHERE TO APPLY
- Marbles, Granite, Terrazzo, Ceramic & Porcelain.
HOW TO USE
- For Ceramic & Porcelain: Use the product pure.
- For Marble & Terrazzo: Dilute 1:2 parts in water.
- For Granite: Dilute 1:1 parts in water.
- Pour the product and let it dry about 7 minutes.
- Rub with shining machine fitted with black pad or hard brush.
- Then remove the waste and rinse with much water.
ADVANTAGES
- Suitable for deep cleaning of very encrusted dirt.
- It easily removes gypsum, concrete, calcium, mineral salts, rust stains etc.,
- Specially recommended for building site final cleaning
Neutral Soap
for Natural Stone
WHERE TO APPLY
- Marbles, Granite, Terrazzo, Ceramic & Porcelain.
HOW TO USE
- For daily cleaning, dilute 250 ml (one glass) per bucket (8 Lt).
- Use the product undiluted to clean very dirty surfaces.
- Other surfaces: impregnate a soft cloth or scourer with the product (diluted or undiluted as appropriate) and buff. Rinse with plenty of water.
ADVANTAGES
- The LP-2 Neutral soap for natural stone surfaces is a neutral ph liquid soap for the regular cleaning of marble and granite surfaces.
- It does not contain abrasive agents; this is why it can keep the original shine of the marbles, even the softest and most dedicate ones, without wearing or discoloring The surface as other inappropriate detergents do
Rust Remover
for Marble
WHERE TO APPLY
- Marble
HOW TO USE
- Clean the surface and extend the product by using a piece of cloth or brush.
Use the product pure. - Leave it on for about 10 minutes and wipe with a soft cloth.
- Repeat the process if necessary, and finally rinse with plenty of water.
ADVANTAGES
- The DC-8 – Rust remover for marble dissolves the rust stains which often appear, after some time, on certain types of marbles, removing them and turning the marble to its original clean look.
Rust Remover
for Granite
WHERE TO APPLY
- Granite
HOW TO USE
- It can be used pure or diluted up to 1/6 parts into water.
- Use on floors: apply the product and let it work for about 7 minutes. Then, buff with the polishing machine fitted with black, brown or red pad, or with a hard brush.
- Remove the waste and rinse with plenty of water.
ADVANTAGES
- The DC-3 – Deoxidizer for granite is special made for an easy elimination of the rust stains which regularly appears on some granites.
- It is also suitable for removing stains caused by the contact of a rusted piece with the granite surface.
Wet Finish
WHERE TO APPLY
- Marble and Granite surfaces
HOW TO USE
- The surface must be clean and dry.
- Apply on the surface by using a piece of cloth impregnated with the product & let it dry.
- On big and vertical surfaces, spread the product with a roller or a paintbrush for a faster application.
- In few minutes the product brings out the natural colours of the stone, providing a nice and lasting wet look.
- Don’t apply on floors or stairs.
ADVANTAGES
- Sealing and providing a bright and durable “wet effect” to any type of marble and granite surfaces.
- Is a self-shining impregnator which intensifies the natural colours of the stone.
- Specially recommended for Varnishing of walls and vertical surfaces.
Blade
Glue
Canteador
Self-shining varnish for Granite and Marble edges
CR-8
Sealer crystalliser for Marbles, Granite and Terrazzo floors
Silicon
Colours
Sait
About
In 2018, ATHEER DIYAN TRADING was established as a prominent trading company, emerging as a key supplier of stone care products in Oman. Our extensive range of offerings includes Marble Grinding & Polishing, General & Deep Cleaning, Marble Glue, Diamond Cutting Blades, as well as Polishing Pads & Papers. With a focus on providing comprehensive solutions for stone maintenance, we take pride in our commitment to delivering quality products and services in the realm of stone care.
Keep in touch
- +968 79907222, +968 79929900
- info@adtoman.com
- Barka, Industrial Area, South Al Batinah, Sultanate of Oman
